WAC PRO3 InvisiLED Damp Location Tape Light

WAC LED-TE24 PRO3 InvisiLED Damp Location Tape Light
PRO3 InvisiLED Damp Rated 450 lm/ft Tape Light

WAC LED-TE24 PRO3 InvisiLED Damp Location Tape Light and Components on Amazon

WAC LED-TE24 PRO3 InvisiLED Damp Location Tape Light on Amazon

InvisiLED® Pro 3 24V Foldable High Output Tape Light System

Power: 5W / ft
Lumens: Up to 475 lm / ft
CRI: 95
Rated Life: 70,000 hours

Constant 1" on-center diode spacing over connections
Curve clip LED-T-CL1 shown
Longitudinally bendable over marked signs
Field-cuttable every 6" at the end of a run

• Ideal in straight or curved ceiling coves for general illumination
• Brightest InvisiLED® system available
• Laterally bendable design
• UV stabilized protective coating protects LEDs and circuitry for long term use in damp locations
• Includes an end cap and a male to male connector with each tape section
• Max run length of 20 feet per power supply
• Power supplies accommodate 120V and 277V installations

WAC Remote Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light

WAC Remote Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light on Amazon

EN-2460-RB2-T
120VAC 24VAC / 60W ELV
Remote Enclosed Electronic Transformer for InvisiLED Tape Light 120V Input 24V Output 60 watt
6.5" x 1.625" x 1.25"

EN-24100-RB2-T
120VAC 24VAC / 96W ELV
Remote Enclosed Electronic Transformer for InvisiLED Tape Light 120V Input 24V Output 96 watt
6.625" x 1.625" x 1.125"

Includes a 6 foot lead wire

UL & CUL Listed for damp locations

WAC Remote Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light

WAC Remote Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light on Amazon

EN-24100-277-RB2-T - Remote Enclosed Power Supply 120-277VAC Input 24VDC Output 96 watt

EN-24100-277-RB2-T
120 - 277VAC 24VDC / 96W 0-10V

12.625" x 3.25" x 2"

Includes a 6 foot lead wire

• Input: 120-277 VAC, 50/60Hz
• Short circuit, over current, over voltage, over temperature protection.
• Class 2. 1W minimum load; 96 maximum load
• Preinstalled with 6' InvisiLED 24V lead wire . Also compatible with Straight Edge, Line, Line 2.0, HR-LED87 and HRLED90 fixture applications. 6' adapter cable included.
• Built-in auto reset, soft start, short and overload circuit

UL & CUL Listed for damp locations

WAC Plug-in Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light

WAC Plug-in Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light on Amazon

EN-2460-P-AR-T
120VAC 24VAC / 60W
Plug-in Electronic Transformer for InvisLED Tape Light 120V Input 24V Output 60 watt 2.75" x 1.625" x 1.75"

Includes a 6 foot lead wire

UL & CUL Listed for damp locations

WAC Plug-in Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light

WAC Plug-in Class 2 Power Supply Compatible with InvisiLED Damp Location Tape Light on Amazon

EN-24100-P-AR-T
120VAC 24VAC / 96W
Plug-in Electronic Transformer for InvisLED Tape Light 120V Input 24V Output 100 watt
2.75" x 1.625" x 1.75"

Includes a 6 foot lead wire

UL & CUL Listed for damp locations